FREETOX N2XSOH-C 0.6/1 kV; Screen: wires+tape
In factories, substations or power plants.
StandardsInternational : IEC 60228; IEC 60332-1; IEC 60332-3 Cat.C; IEC 60502-1; IEC 60754-2; IEC 61034
National : NTP-IEC 60228; NTP-IEC 60502-1
In factories, substations or power plants where there is a electrical noise or transient, for control, measuring or signaling systems. Direct application in places with public attendance high. Not recommended for outdoor installations.
1. Conductor: Copper, class 2.
2. Insulation: Cross linked polyethylene XLPE.
3. Tape: Polyester tape.
4. Inner covering: HFFR thermoplastic compound.
5. Screen: Copper wires + copper tape in open spiral.
6. Tape: Polyester tape.
7. Outer sheath: HFFR thermoplastic compound.
Minimum dielectric losses, high insulation resistant. Easy installation. Adequate transient shield. The outer sheath has the following characteristics: Fire retardant, low emission dense smoke and halogen free.
From 2.5 mm2 up to 6 mm2.
INDECO S.A. FREETOX N2XSOH-C 0.6/1 kV - Section - Year
Non returnable wooden reels.
Insulation: Black with white numbers.
Outer sheath: Black.
NTP-IEC 60228: Conductors of insulated cables.
NTP-IEC 60502-1: Power cables with extruded insulation and their accessories for rated voltages from 1 kV and 3 kV.
IEC 60228: Conductors of insulated cables.
IEC 60332-1: Test for vertical flame propagation for a single insulated wire or cable.
IEC 60332-3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C.
IEC 60502-1: Power cables with extruded insulation and their accessories for rated voltages from 1 kV and 3 kV.
IEC 60754-2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity.
IEC 61034-2: Measurement of smoke density of cables burning under defined conditions.
|Core identification||Black cores with white numbers|
|Outer sheath||Halogen free thermoplastic compound|
|Screen||Copper wire + copper tape|
|Halogen free||IEC 60754-2|
|Total number of wires||7|
|Minimum insulation thickness||0.7mm|
|Minimum outer sheath thickness||1.2mm|
|Resistance of the screen||2.0Ohm/km|
|Rated Voltage Uo/U (Um)||0.6/1 kV|
|Smoke density||IEC 61034|
|Flame retardant||IEC 60332-1|
|Fire retardant||IEC 60332-3 Cat.C|
|Maximum operating temperature||90°C|
|Overload maximum core temperature||130°C|
|Short-circuit max. conductor temperature||250°C|
|See all products|