StandardsInternational : IEC 60228; IEC 60332-1; IEC 60502-1; IEC 60811-1-1; IEC 60811-1-2; IEC 60811-1-3; IEC 60811-1-4; IEC 60811-2-1; IEC 60811-3-1; IEC 60811-3-2
National : NTP-IEC 60228; NTP-IEC 60502-1
In factories, for systems of motor control, lighting, signaling and overal equipment interconnection, control circuits of automatic machines where mechanical strenght is required.
1. Conductor: Soft copper, class 2.
2. Insulation: Cross linked polyethylene XLPE.
3. Bare conductor: Soft copper, class 2.
4. Tape: Polyester tape.
5. Inner covering: Compound polyvinyl chloride PVC.
6. Armour: Galvanized steel tapes.
7. Outer sheath: Compound polyvinyl chloride PVC.
Its armour provides additional mechanical protection. Resistance to moisture and abrasion. Adequate resistance to grease and oil. Flame retardant. Easy installation.
1.5 mm2 and 2.5 mm2.
INDECO S.A N2XBY-C 0.6/1 kV - N° Conductors x Section - Year
Non returnable wooden reels.
Insulation: Black with white numbers.
Outer sheath: Black.
NTP-IEC 60228: Conductors of insulated cables.
NTP-IEC 60502-1: Power cables with extruded insulation and their accessories for rated voltages from 1 kV and 3 kV.
IEC 60228: Conductors of insulated cables.
IEC 60332-1: Test for vertical flame propagation for a single insulated wire or cable.
IEC 60502-1: Power cables with extruded insulation and their accessories for rated voltages from 1 kV and 3 kV.
IEC 60811-1-1: Measurement of thickness and overall dimensions - Test for determining the mechanical properties.
IEC 60811-1-2: Thermal ageing methods.
IEC 60811-1-3: Water absorption tests - Shrinkage test.
IEC 60811-1-4: Tests at low temperature.
IEC 60811-2-1: Ozone resistance, hot set and mineral oil immersion tests.
IEC 60811-3-1: Pressure test at high temperature - Tests for resistance to cracking.
IEC 60811-3-2: Loss of mass test - Thermal stability test.
|Conductor material||Soft copper|
|Core identification||Black cores with white numbers|
|Armour type||Steel tapes|
|Minimum insulation thickness||0.7mm|
|Total number of wires||7|
|Minimum outer sheath thickness||1.2mm|
|Rated Voltage Uo/U (Um)||0.6/1 kV|
|Mechanical resistance to impacts||Good|
|Flame retardant||IEC 60332-1|
|Maximum operating temperature||90°C|
|Overload maximum core temperature||130°C|
|Short-circuit max. conductor temperature||250°C|
|See all products|