NGSE2Y 6/10 kV PHI16 3x185 mm2
StandardsInternational : IEC 60332-1; IEC 60502-2
National : ASTM B 3; ICEA S-93-639; UL 1072; UL 1581
Power distribution in medium voltage. As transformer feeders in substations. In power plants, industrial and operation installations, in residential areas and mining installations, in dry or wet locations.
1. Conductor: Compact stranded soft copper, class 2.
2. Inner semi-conductor: Extruded.
3. Insulation: HEPR.
4. External semi-conductor: Extruded strippable.
5. Screen: Copper wires.
6. Filler: Linear low-density polyethylene LLDPE.
7. Outer sheath: Linear low-density polyethylene LLDPE.
Conductor temperature of 105ºC for normal operation, 140°C for emergency overload and 250°C for short circuit conditions. Excellent properties against heat aging. Resistance to abrasion, moisture and sunlight. Adequate resistance to greases and oils. Flame retardant.
From 120 mm² up to 240 mm².
INDECO S.A. NGSE2Y 6/10 kV Nb. cores x gauge - PHI16 - Year - Sequential length.
Non returnable wooden reels.
Insulation: Natural (Cores are identified with binder tapes; color: white (core nb.1), black (core nb. 2), red (core nb. 3)).
Outer sheath: Red.
ASTM B3: Soft Annealed Copper Wire.
IEC 60332-1: Test for vertical flame propagation for a single insulated wire or cable.
IEC 60502-2: Power cables with extruded insulation and their accessories for rated voltages from 6 kV up to 30 kV.
IEC 60811-1-2: Thermal ageing methods.
IEC 60811-1-3: Water absorption tests - Shrinkage test.
IEC 60811-1-4: Tests at low temperature.
IEC 60811-2-1: Ozone resistance, hot set and mineral oil immersion tests.
IEC 60811-3-1: Pressure test at high temperature - Tests for resistance to cracking.
IEC 60811-3-2: Loss of mass test - Thermal stability test.
UL 1581 Section 1200 (Sunlight resistance): Reference standard for electrical wires, cables, and flexible cords - Carbon-Arc and Xenon-Arc Tests- Sunlight resistance.
ICEA S-93-639: 5-46 kV shielded power cable for use in the transmission and distribution of electric energy. Referred to oil resistance.
|Material of the inner semi-conductor||Extruded|
|Material of the external semi-conductor||Extruded strippable|
|Individual screen||Copper wires helically applied|
|Number of cores||3|
|Total number of wires||37|
|Diameter over insulation||23.41mm|
|Diameter over screen||26.77mm|
|Diameter over Sheath||65.31mm|
|Minimum outer sheath thickness||2.3mm|
|Minimum insulation thickness||3.0mm|
|Max. DC resistance of the conductor at 20°C||0.0991Ohm/km|
|Phase reactance 60 Hz - trefoil formation||0.1098Ohm/km|
|A.C. Conductor resist. at 105°C - trefoil formation||0.134Ohm/km|
|Perm. current rating buried 20°C - trefoil formation||335A|
|Rated Voltage Uo/U (Um)||6/10 kV|
|Perm. current rating in air 30°C - trefoil formation||568A|
|Flame retardant||IEC 60332-1|
|Fire retardant||IEC 60332-3 Cat.C|
|Oil resistance||ICEA S-93-639|
|U.V resistance||UL 1581 - Sunlight Resistance|
|Maximum operating temperature||105°C|